ESD Lab Tables in Bangalore for Electronics Assembly & Precision Work
Monsoon Modular manufactures ESD lab tables in Bangalore for static-sensitive electronics and precision work environments. Our grounded, static-dissipative workbenches are ideal for electronics assembly, PCB and SMT production lines. They are also suitable for repair, testing, inspection and rework stations where static control is essential. Each workstation is designed to help protect sensitive electronic components from electrostatic discharge.
Table sizes, layouts, accessories and configurations can be customised according to your workspace requirements. Integrated cable management, grounding provisions and equipment-support options can be incorporated as required.
ESD Lab Tables with Static-Dissipative Worktops & Grounding
An ESD lab table is a workbench with a static-dissipative worktop and a grounding point, built to safely drain electrostatic charge away from components during electronics assembly, testing or repair. Monsoon Modular manufactures them in Bengaluru with worktop resistance in the 10⁶ to 10⁹ ohm range, a grounding cord to a common point ground, and optional shelving, CPU trolleys and drawer storage.
Single-bay, double-sided or rework bench
Format is chosen based on line throughput, process type and how many operators share the same bench.
Format 01
Single-bay bench
One operator per bench with dedicated grounding, shelving and storage — suited to rework, QC and R&D stations.
Format 02
Double-sided bench
Two operators share a bench back-to-back on a common grounded worktop, for higher seat density on assembly floors.
Format 03
In-line SMT bench
Benches join end-to-end along a process flow, each stage grounded independently for continuous-line static control.
Built for static-sensitive electronics work
ESD lab tables are specified wherever components or boards susceptible to electrostatic discharge are handled, assembled or tested.
- Electronics Assembly Lines
- PCB & SMT Manufacturing
- Rework & Repair Stations
- Semiconductor & Chip Handling
- R&D & Test Labs
- Mobile & Device Repair Centres
- Defense & Aerospace Electronics
- QC & Inspection Benches
Why electronics lines are fitted with ESD-safe benches
Standardised, interlocking components rather than fixed carpentry — which changes how a static-control area can be sized, expanded or re-laid.
Protects static-sensitive components
A grounded, dissipative worktop drains charge safely away from boards and components before it can discharge into them.
Supports a full static-control program
Bench, wrist strap and floor mat grounding points are specified together to form a complete, auditable ESD path.
Built for continuous line use
Reinforced frames and durable worktops are specified for daily assembly-line or repair-bench duty, not occasional bench work.
Fits SMT and rework lines alike
The same bench module supports high-throughput SMT stations and single-unit rework or QC benches, sized to the process.
Cable and tool storage built in
CPU trolleys, overhead shelving and drawer storage keep tools, meters and fixtures within reach without cluttering the worktop.
Easy to reconfigure or expand
Modular joints mean a static-control area can be extended or re-laid as a line changes, without replacing the benches.
From worktop to common point ground
An ESD bench only protects components when the full grounding path is connected — this is the sequence we design and wire on-site.
Static-dissipative worktop
The bench surface is manufactured with a controlled surface resistance so charge bleeds away gradually rather than discharging suddenly.
Grounding point & ground cord
A dedicated grounding stud on the worktop connects via a resistor-protected ground cord to the room’s common point ground.
Common point ground
Bench, wrist strap and floor mat grounding cords are tied to a single common point, which is then connected to facility earth.
Single-bay, double-sided or rework bench
Tabletops are built on engineered wood cores, finished in laminate or veneer to match your office interiors. Legs and bases use powder-coated metal or panel-clad wood construction, sized for the footfall a shared meeting room sees through the day.
Cable management is planned into the table at design stage — grommets, in-table trays and optional power/data/HDMI modules positioned to suit your video-conferencing setup and seating plan.
- Engineered wood core
- Laminate & veneer finishes
- Powder-coated metal base
- In-table cable grommets
- Power & data modules
- Custom edge profiles
Standard configurations
Every dimension below is adjusted to your process and headcount — these are our common starting configurations.
| Specification | Details |
|---|---|
| Worktop Resistance | 10⁶ to 10⁹ Ω |
| Bench Width | 1200 / 1500 / 1800 mm |
| Bench Depth | 600 / 750 mm |
| Standard Height | 740 mm |
| Grounding | Grounding stud with resistor-protected cord |
| Worktop Material | Static-dissipative laminate / Rubber ESD mat |
| Storage | Overhead shelf, drawers, CPU trolley |
| Frame | Powder-coated MS frame, modular joints |
Manufactured in-house, tested for durability
Certified under ISO 9001:2005, ISO 14001:2015 and ISO 45001:2018, and rated to BIFMA Level 1 & 2 performance standards; worktops specified in line with ANSI/ESD S20.20 guidance.
Materials
Epoxy, stainless steel & phenolic resin
QC Tested
Performance & durability checks
Custom Sizing
Built to your floor plan
Install Support
Assembly & dismantling service
Frequently Asked Questions
Excited to meet you in person! Come visit us at our office to discuss your new design. We’re looking forward to connecting face-to-face.
What is the difference between a meeting room table and a conference table?
Who manufactures meeting room tables in Bangalore?
Can meeting room tables be built for video conferencing?
What shapes are available for meeting room tables?
How many people does a typical meeting room table seat?
Are Monsoon Modular meeting room tables certified?
Other laboratory & workstation formats
Every format below is manufactured to order at our Bengaluru facility — pick one, or mix formats across floors and departments.
Type 01
Computer Lab Workstations
Multi-seat computer desks for labs and training rooms.
- Lowest per-seat footprint
- Fast to install & reconfigure
- Inline cable management
Best for: back-office teams, training rooms, narrow floor plates.
Type 02
Manager Tables
Executive tables with storage and modesty panels for cabins.
- Larger surface, same footprint depth
- Suits dual-monitor setups
- Pairs well with mid-height partitions
Best for: managers, analysts, finance & design roles.
Type 03
Office Workstations
Corner desk format with two connected work surfaces.
- Highest seating density of the four
- Distinct angled zone per seat
- Central cable & power routing
Best for: managers, analysts, finance & design roles.
Type 04
Office Furniture
Full range of workstations, tables and storage systems.
- Open sightlines, easy reconfiguration
- Lower cost per seat
- Works with hot-desking
Best for: startups, product & engineering teams.
Setting up an ESD-safe line or lab in Bangalore?
Share your room sizes and seating requirement, and our team will recommend the right meeting table format for each space.